Rơle điện tử Schneider EOCR-FDM2 - Relay điện tử Schneider EOCR-FDM2

Mã sản phẩm: EOCR-FDM2

Giá bán : Liên hệ

Hãng sản xuất: Schneider Electric

Bảo hành: 12 tháng

Tình trạng: Còn hàng

Số lượng:

Chia sẻ sản phẩm này với bạn bè:

■ Micro-controller unit based
■ Real time processing / High precision
■ Protections : Over current, Under current, Phase loss, Phase reversal, Stall, Jam, Current
Imbalance, Earth fault (3MZ2/FMZ2)
■ Inverse available up to 32Amps without external CTs.
■ Ancillary functions : Fail safe, Pre-alarm (3DM2/FDM2), Accumulated running hour, 3 faults
records & limitation of auto-restart.
■ Reinforced monitoring function : Monitoring distance up to 400M, 3 phase current display,
Pre-alarm (3DM2/FDM2) & Trip cause indication
■ Bar graph indication of a load current to the current setting.
■ Available application on single and 3 phase motor
■ RoHS Compliance
■ For FDM2/FMZ2, normal protections are guaranteed even if PDM is disconnected.

Protective Item	Condition & Setting range	Operation time
Over-current	Condition : Load current (In) exceeds setting current (Is) Setting range : 0.5~60A (Def), 0.5~32A (Inv)	Definite (Def) : 0.2~30s adjust. Inverse (Inv) : 1~30 class
Under-current	Condition : Load current (In) less than setting currentIn ≤ uc uc should be less than oc setting	oFF, 1~10s adjustable
Reverse phase (RP)	Condition : Reversed phase sequence input on EOCR. Enable or disable : Selectable	Within 0.15s
Stall (Sc)	Condition : In ≥ Stall current setting (Sc). Active only in motor starting 0.5~30A : 2~8 times of oc setting ~40A : 2~6 times, ~60A : 2~4 times.	Right after D-time elapsed
Jam (JA)	Condition : In ≥ Jam current setting (JA). Active only in motor running 0.5~50A : 1.5~5 times of oc setting ~60A : 1.5~4 times of oc setting	0.3~5s adjustable
Imbalance (IM)	Condition : Current imbalance ≥ Setting imbalance % Setting range : 10~50% of imbalance	1~10s adjustable
Earth fault (EF)	Condition : EF current (Ie) exceeds setting current (Ies) OFF, 0.03~10A	0.05~5s adjustable -- 3MZ2/FMZ2 only --

Over current	Rated setting range (A)		Definite TCC : 0.5~60A : use external CT higher than 60A
			Inverse TCC : 0.5~60A : use external CT higher than 32A
Under current	Rated setting range (A)		0.5A ~ less than oc setting
Operating time characteristics			Definite(Def) / Inverse(Inv)
Time Setting	Def	D-time	0~200s
		O-time	0.2~30s
	Inv (cLS)		1~30 classes
	GF delay time (Edt)		0~30s (3MZ2/FMZ2)
	GF O-time (Et)		0.05~10s (3MZ2/FMZ2)
	Auto-reset		0.5s~20min.
	Reset mode		Manual reset (H-r) / Electric reset (E-r) / Auto-reset (A-r)
Control power	Voltage		100~240VAC/DC (85% ~110%, Free voltage), 24VAC/DC ( ±5%) .
	Frequency		50/60Hz
	Power consumption		Lower than 7VA
Output	Capacity		3A/250VAC resistive.
	Composition		1a1b : OC or GR
			1a : AL
Display	7 segment LED		3 phase amps, Cause of trip, Setting parameters indication.
	Bar-graph		Load factor.
Mounting			Panel mounting (3DM2/3MZ2)
			Flush mounting (FDM2/FMZ2)
Insulation	Between case & circuit		Over DC500V 10MΩ
Dielectric strength	Between case & circuit		2kV, 50/60Hz, I Min.
	Between contacts		1kV, 50/60Hz, I Min.
	Between circuit		2kV, 50/60Hz, 1 Min
Electrostatic discharge (ESD)		IEC61000-4-2	Level 3 : Air discharge : ±8kV, Contact discharge : ±6kV
Radiated disturbance		IEC61000-4-3	Level 3 : 10V/m, 80 ~ 1000MHz
Conducted disturbance		IEC61000-4-6	Level 3 : 10V,0.15 ~ 80MHz
EFT/Burst		lEC61000-4-4	Level 3 : ±2kV, 1 Min.
Surge		IEC61000-4-5	Level 3 : 1.2 x 50μs, ±4kV (0°, 90°, 180°, 270°)
Emission		CISPR11	Class A ( Conducted and radiated)
Environment	Temperature	Store	-40°C ~ +85°C
		Operation	-20°C ~ +60°C
	Humidity		30~85% RH (Non-condensate)
Weight			3DM2 / 3MZ2	FDM2 / FMZ2
		Window type	265g	350g
		Bottom hole type	295g	390g
		Terminal type	295 + 120 = 415g	390 + 120 = 510g
		Display (W/3M cable)		125g
Power consumption			Less than 7VA.